Cleaning Plastic: How to Sterilize & Disinfect with Brushes (2024)

Cleaning, Disinfecting and Sterilizing Plastics

General Cleaning

Cleaning Plastic: How to Sterilize & Disinfect with Brushes (1)

There are numerous ways to properly wash, disinfect or sterilize plastics. Washing Plastics with a Mild Detergent is sufficient for most general applications. Be sure to rinse with tap water, and then rinse again with distilled water. Most plastics, particularly the polyolefins (PPCO, PP, PMP, LDPE, and HDPE), have non-wetting surfaces that resist attack and are easy to clean. It is important to not use abrasive cleaners or scouring pads on any plastic. Do not use strong alkaline cleaning agents with polycarbonate (PC).

Plastic Sterilization vs. Plastic Disinfection

When considering methods for sterilization procedures, it is important to differentiate between sterilization and disinfection. Sterilization kills all viable microorganisms. Disinfection only reduces the number of viable microorganisms. Commonly used disinfectants include alcohol, iodophors, quaternary ammonium.

How to Clean, Disinfect and Sterilize Plastic Material

Gordon Brush® has provided several ways to properly clean plastics. Only some of these methods may be applicable to your specific product.

  • Wash the container: For proper plastic disinfection wash the plastic with anti-bacterial dish soap and hot water. The soap will immediately kill surface bacteria, but may not guarantee complete sterilization; combining washing with another method below is more effective. For the best results always use a non-diluted alcohol rinse when washing. Additionally, both rubbing alcohol and grain alcohol kill bacteria on plastic surfaces.
  • Soak the plastic: For complete plastic sterilizationsoak the plastic container in a bleach-water solution of about 5 to 10 percent bleach. Bleach will not take long to disinfect, so the soaking time is minimal.
  • Heat plastic: This can be done in a hot dishwasher rinse, but a microwave is more effective. Wet the plastic container first, as the interaction between the microwave's heat and water is what causes sterilization. Place the plastic container in a microwave on high power for approximately two minutes. Be cautious as both the dishwasher and microwave can melt plastic. Polypropylene plastics are stronger than standard plastics and can withstand high heat.
  • Place plastics under a UV lamp: Ultraviolet plastic sterilization is a safe, non-heated method used widely in food processing, laboratories and water treatment. Although a UV lamp is not the most common kitchen or garden tool, UV lamps are commercially available.

Brushes for Cleaning, Disinfecting & Sterilizing Plastics

Gordon Brush® provides numerous types of sterilizer and cleaning brushes for your plastic container disinfection and sterilization needs. Our brushes for disinfecting, cleaning and sterilizing plastics provide a highly effective way to properly clean plastics. Some of the sterilizer cleaning brushes that we offer include:

  • Acid Brushes - Acid brushes are used to apply glue, or other liquids and [certain] chemicals, and for quick small-area cleaning or wiping applications.
  • Applicator Brushes – These sterilization brushes are regularly used within the medical field for cleaning and sterilizing diverse types of medical equipment.
  • Block Brushes – The unique fill material within our block style sterilizer cleaning brushes are ideal for cleaning, sterilizing and disinfecting plastic containers.
  • Chemical Resistant Brushes – Our chemical resistant brushes are perfect for cleaning plastics that have had chemical coatings applied to them during manufacturing.
  • Cleanroom/Heat Tolerant Brushes – Our cleanroom/heat tolerant brushes for disinfecting plastics are highly useful for applications that need heat treatment or cleanroom requirements.
  • Flow Thru Brushes – This unique type of sterilizer cleaning brush enables liquid to flow through the synthetic or natural bristles of the brush. This provides a plastic disinfection process that combines both bristles and liquid.
  • Hygienic/Sanitary Brushes – These brushes minimize the potential for trapping bacteria and other contaminants during plastic disinfection and sterilization. The bristles on these brushes are sturdy enough for thorough, reliable cleaning, but soft enough for safe, scratch-free use on most materials.
  • Metal Free Brushes – These brushes for sterilizing, cleaning and disinfecting plastics are ideal for cleaning the inside of straight and curved plastic pipes and tubes. They’re also perfect for cleaning valves and fittings, or any application where aggressive scrubbing is required, and where surface scratching must be avoided.
  • Spiral/Twisted-in-Wire Brushes – These brushes are ideal for applications that require an aggressive clean without the threat of scratches or abrasions to your plastic container.
  • Tooth-Brush Style Brushes – These types of brushes are used primarily for plastic applications that require fine detailing. The tooth brush bristles easily slide in-between crevices that are hard to clean with other types of brushes.
  • Utility Brushes – We carry numerous types of utility brushes for your plastic sterilization and disinfection needs. Our customized utility brushes provide a bevy of options for your unique project requirement needs.
  • Valve Brushes – Our valve sterilizer cleaning brushes provide complete coverage when cleaning your valves and other plastic container orifices.

Not sure what type of plastic cleaning brush you need? Or would you much rather order a brush through a live person over the phone?

No problem, give us a call! 1-800-950-7950 or 1-323-724-7777

Why Sterilize Plastic?

Plastic sterilization is used to reduce or eliminate bioburdens to a safe level. A bioburden refers to the number of microorganisms present within the plastic, including bacteria, virus, and fungi. Microbiologists can test for the types and numbers of bioburdens that are present within the plastic, including pyrogens, which are remnants of bacteria that carry endotoxins and cause fevers. Additionally, an item may be sterile, but still contain pyrogens.

Furthermore, when plastic is glass-reinforced, it can withstand higher temperatures and be sterilized and depyrogenated at the same time. Exposure to temperatures of 600ºF or higher kills microorganisms and burns endotoxins. The higher the temperature, the shorter the exposure time needed for depyrogenation. Unfortunately, most plastic won't survive the additional depyrogenation temperatures, so it is frequently sterilized and then washed with pyrogen-free water.

What Sterilization Method Should I be using with My Plastic Medical Device?

Click here for: A technical whitepaper 'Sterilization of Plastics' from our friends at Zeus Industrial Products, Inc.

Contact Gordon Brush® Today

Contact usfor more information on our sterilizer cleaning brushes and brushes for disinfecting plastics, or for a custom quote today.

Cleaning Plastic: How to Sterilize & Disinfect with Brushes (2024)

FAQs

How do you clean and sterilize plastic? ›

For the best results always use a non-diluted alcohol rinse when washing. Additionally, both rubbing alcohol and grain alcohol kill bacteria on plastic surfaces. Soak the plastic: For complete plastic sterilization soak the plastic container in a bleach-water solution of about 5 to 10 percent bleach.

What is the best way to clean plastic? ›

Use a nonabrasive, all-purpose cleaner. Rinse with clean water and dry with a clean, soft cloth. Avoid using abrasive cleanser that may scratch the plastic. Use a tub/tile/sink cleaner; nonabrasive, all-purpose cleaner; or a paste of baking soda and water.

Can plastic be sterilized? ›

There are various sterilisation methods, however, the three basic approaches used to sterilise plasticware are: Ethylene Oxide (EtO) Radiation (gamma radiation, electron beam radiation) Steam Autoclave.

Does vinegar clean plastic good? ›

Small Appliances

The plastic and glass surfaces on most small kitchen appliances, such as blenders, coffee makers, and toasters, are safe to clean with vinegar, but you want to avoid any rubber parts or metal that vinegar can corrode.

Does hot water sterilize plastic? ›

To sterilize baby bottles using boiling water, all you need is water and a pot. And don't worry—it's fine to sanitize plastic bottles using this method. (Just remember that bottles should be cleaned with soap and water beforehand.)

What is the most commonly used procedure for sterilizing plastic devices? ›

Ethylene Oxide gas (EtO) is frequently used to sterilize materials that are otherwise too sensitive to heat or radiation sterilization. Many plastics fall into this category and EtO sterilization is frequently used for single use medical devices made of plastic.

How to clean chemicals out of plastic? ›

For many chemicals, water-based solvents (the solvent depends on the chemical) are the most appropriate way to clean. Using high-pressure hosepipes is the most effective method (and the easiest), but scrubbing may also be required.

Can you disinfect a brush? ›

If you feel the brush needs to be sanitized, lightly spray with a disinfecting spray like Lysol to kill bacteria. Do not use isopropyl alcohol, because it can dry out the natural bristles.

What is the best solution to Sanitise brushes? ›

Baby shampoo.

Baby shampoo does a great job of cleaning makeup brushes. It's also gentle on the bristles. Pour a drop of baby shampoo into some lukewarm water and swirl with your makeup brushes.

How do you disinfect a brush head? ›

For most people, clean, hot water is enough to sanitize a toothbrush between uses. Before applying toothpaste, run hot water gently over the head of your toothbrush. The water should be hot enough to produce steam. After you've brushed your teeth and mouth thoroughly, rinse your brush with more hot water.

Does hydrogen peroxide sterilize plastic? ›

To sterilize plastic containers and lids:

Soak in hydrogen peroxide (3%) for about 10-15 minutes, give them a quick rinse and leave them out to dry in a clean environment. Or, spray with isopropyl alcohol (70%) and leave to air dry in a clean environment.

Does boiling water sterilize plastic? ›

To sterilize baby bottles using boiling water, all you need is water and a pot. And don't worry—it's fine to sanitize plastic bottles using this method. (Just remember that bottles should be cleaned with soap and water beforehand.)

What is the preferred cleaning agent for plastic surfaces? ›

Apply warm water and mild soap or ammonia-based foam glass cleaner solution to a clean, lint- free microfiber cloth.

Top Articles
Latest Posts
Article information

Author: Greg Kuvalis

Last Updated:

Views: 5873

Rating: 4.4 / 5 (55 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Greg Kuvalis

Birthday: 1996-12-20

Address: 53157 Trantow Inlet, Townemouth, FL 92564-0267

Phone: +68218650356656

Job: IT Representative

Hobby: Knitting, Amateur radio, Skiing, Running, Mountain biking, Slacklining, Electronics

Introduction: My name is Greg Kuvalis, I am a witty, spotless, beautiful, charming, delightful, thankful, beautiful person who loves writing and wants to share my knowledge and understanding with you.