+-
All plans are copyrighted by our designers. Photographed homes may include modifications made by the homeowner with their builder.
About this planWhat's included
Simply Sweet 2-Bed Cottage Plan with Front Porch
Plan 46075HC
- This plan plants 3 trees
- 1,107
Heated s.f.
- 2
Beds
- 2
Baths
- 1
Stories
- Simply sweet defines this 2-bed, cottage plan with oodles of charm wrapped up in 1,107 sq. ft. of living space.
- A covered porch welcomes you home, and a convenient coat closet rests just inside the formal entry.
- The combined living and dining rooms can both enjoy the cozy fireplace, and the open kitchen offers access to the front porch.
- The bedrooms occupy the right side of the home, with the rear-facing bedroom including a full bath and two closets.
- A back stoop leads to the laundry / mud room, which is where you can find a pantry to make unloading groceries even easier.
We work with hundreds of designers and architects who work in a variety of styles. It is important to note. Their plan packages may contain different details.
Westrongly encourage you to contact us for the contents of any plan you may be interested in purchasing.
Below are examples of sheets that may be included in plan sets - please be aware that not every plan includes every one of these pages:
Floor Plan
shows the placement of interior walls and the dimensions for rooms, doors, windows, stairways, etc. of each level of the house.
Exterior Elevations
show the front, rear and sides of the house, including exterior materials, details and roof pitches.
Building Cross Section
shows details of the house as though it were cut in slices from the roof to the foundation. The cross sections detail the construction of the home, insulation, flooring and roofing.
Electrical Plan (when available)
shows the suggested locations for fixtures and outlets. Please contact us to see if an electrical plan is included in the plan set.
Notes & Details
provides information for structural specifications, excavating and grading, masonry and concrete work, carpentry and wood specifications, thermal and moisture protection and specifications about drywall, tile, flooring, glazing, caulking and sealants.
What is not included in the plans:
- Architectural or Engineering Stamp
- Site Plan
- Mechanical Drawings (location of heating and air equipment and duct work)
- Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations)
- Framing layouts with beam sizes and locations
- Energy calculations
- Materials list - MAY be available as a purchasable option under the "Options" tab
Building Code
Because of the wide range of requirements throughout states and municipalities, it is possible that the plans may not have all of the information required by your building department. If this is the case, we recommend hiring a local design professional or engineer who can assist bringing the plans up to your local building code.
Engineering
Some states require that a licensed architect or engineer review and stamp the plans. If this is the case where you will be building, a local professional will be able to assist you.
Important Extras: Sold separately
Readable Reverse Plans
The layout is reversed and all the writing is corrected so you can read the writing. With this option, all of your sets will appear the way you want to build the home. This option is available for an additional charge.
Mirror Reverse Plans
The lettering and dimensions will read backwards, so you will need to order at least one set non-reversed as a reference copy.
Itemized List of Materials (when available)
Includes the quantity, type and size of materials needed to build your home.
Floor Plan
Main Level
NOTE:
If you want to purchase this plan in reverse, please select "readable reverse" or "mirror reverse" under Options above.
Plan details
Square Footage Breakdown
- Total Heated Area:1,107 sq. ft.
- 1st Floor:1,107 sq. ft.
- Porch, Combined:305 sq. ft.
Beds/Baths
- Bedrooms:2
- Full bathrooms:2
Foundation Type
- Standard Foundations:Slab
- Need A Different Foundation?Request A Modification Quote
Exterior Walls
- Standard Type(s):2x4
Dimensions
- Width:36' 4"
- Depth:44' 6"
- Max ridge height:15' 0"
Ceiling Heights
- Floor / Height:First Floor /8' 0"
Roof Details
- Primary Pitch:6 on 12
Architectural Style
- Bungalow
- Cottage
- Country
- Craftsman
- Ranch
- Rustic
- Vacation
Special features
- Laundry - Main Level
- Master Suite - 1st Floor
- Mudroom
×
What's included
We work with hundreds of designers and architects who work in a variety of styles. It is important to note. Their plan packages may contain different details.
Westrongly encourage you to contact us for the contents of any plan you may be interested in purchasing.
Below are examples of sheets that may be included in plan sets - please be aware that not every plan includes every one of these pages:
Floor Plan
shows the placement of interior walls and the dimensions for rooms, doors, windows, stairways, etc. of each level of the house.
Exterior Elevations
show the front, rear and sides of the house, including exterior materials, details and roof pitches.
Building Cross Section
shows details of the house as though it were cut in slices from the roof to the foundation. The cross sections detail the construction of the home, insulation, flooring and roofing.
Electrical Plan (when available)
shows the suggested locations for fixtures and outlets. Please contact us to see if an electrical plan is included in the plan set.
Notes & Details
provides information for structural specifications, excavating and grading, masonry and concrete work, carpentry and wood specifications, thermal and moisture protection and specifications about drywall, tile, flooring, glazing, caulking and sealants.
What is not included in the plans:
- Architectural or Engineering Stamp
- Site Plan
- Mechanical Drawings (location of heating and air equipment and duct work)
- Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations)
- Framing layouts with beam sizes and locations
- Energy calculations
- Materials list - MAY be available as a purchasable option under the "Options" tab
Building Code
Because of the wide range of requirements throughout states and municipalities, it is possible that the plans may not have all of the information required by your building department. If this is the case, we recommend hiring a local design professional or engineer who can assist bringing the plans up to your local building code.
Engineering
Some states require that a licensed architect or engineer review and stamp the plans. If this is the case where you will be building, a local professional will be able to assist you.
Important Extras: Sold separately
Readable Reverse Plans
The layout is reversed and all the writing is corrected so you can read the writing. With this option, all of your sets will appear the way you want to build the home. This option is available for an additional charge.
Mirror Reverse Plans
The lettering and dimensions will read backwards, so you will need to order at least one set non-reversed as a reference copy.
Itemized List of Materials (when available)
Includes the quantity, type and size of materials needed to build your home.
×
Discount Terms & Conditions
Not all items qualify for discounts. Discounts are only applied to plans, not to Cost-to-Build Reports, plan options and optional foundations and some of our designers don't allow us to discount their plans.
Scroll
×
Please note the following
Your Materials List will match the base plan only. The following options will not be reflected on the materials list:
CancelAdd to Cart